Gateway 9515 User Manual page 95

8
If you are installing a second processor in your server, follow the instructions in
"Removing the processor air dam" on page 48
the processor air duct.
Caution
9
Before inserting the processor into the socket, make sure that:
The processor release lever is open all the way (135° from the closed position)
■
The triangular arrow on the corner of the processor aligns with the triangular icon
■
on the corner of the processor socket
10
Install the new processor into the processor socket, then press the processor locking
lever down until it lays flat against the processor socket.
90
If you add a second processor to your server, you must remove the
processor air dam or the processor may overheat, causing possible
data loss and damage to the processor.
www.gateway.com
to remove the processor air dam in