Rps - Bosch B5512 Owner's Manual

136 en | B920 Actions menu
24.4

RPS

Use the RPS menu for connection to Remote
Programming Software (RPS). Your security company
uses RPS to configure and service your security system.
RPS is intended for use by professional or licensed
installers only.
24.4.1 Answer
Use the Answer option to answer the phone (pick up
the phone line) to connect to RPS.
Using the Answer menu option to answer an incoming
call from RPS:
1. Press [MENU] to open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and
press [ENTER], or simply press [3].
3. Use [NEXT] to go to the RPS menu option, and press
[ENTER], or simply press [4].
4. Press [1] or [ENTER] to reset the sensors with the
Answer option.
5. Enter your passcode and press [ENTER]. The keypad
shows RPS is connecting.... and then returns to idle
text.
2012.12 | 03 | F.01U.265.453 Owner's Manual
Control Panels
Bosch Security Systems, Inc.