108 en | B920 Menu tree
Control Panels
Commands
Commands resides outside of the Menu tree. You can
initiate a limited number of functions with the [CMD]
key plus the one or two digit command.
If you know the command number, press [CMD] and
then the one or two digit command.
Review the available commands in the table on the next
page
Notice!
With B920 and B930 keypads, you can use [PREV] or
i
[NEXT] to move through the list of commands, and
press [Enter] or [ENTER] when viewing the desired
command.
2012.12 | 03 | F.01U.265.453
Owner's Manual
Bosch Security Systems, Inc.