Bosch B5512 Owner's Manual page 137

Control Panels
24.4.2 Network Originate
Use this function to originate an RPS session using an IP
(internet) connection.
Connecting to RPS using an internet connection:
1. Press [MENU] to open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and
press [ENTER], or simply press [3].
3. Use [NEXT] to go to the RPS menu option, and press
[ENTER], or simply press [4].
4. Use [NEXT] to go to the Network Originate menu
option, and press [ENTER], or simply press [2].
5. Enter your passcode and press [ENTER].
6. To use the programmed port number, press [1] or
press [ENTER]. The connection progress begins.
7. If you wish to change the port number before
connecting, press [NEXT] and then [ENTER], or
simply press [2]. The [ESC] key acts as a backspace
key. Press [ESC] to delete the characters, and then
enter the new characters. Press [ENTER]. The
connection process begins.
Bosch Security Systems, Inc. Owner's Manual
B920 Actions menu | en 137
2012.12 | 03 | F.01U.265.453