Figure 3-44 Ospf Parameters Page - Comtech EF Data Vipersat SLM-5650A User Manual

2.
Note: For systems that are already operating with OSPF, activation of any
NOTE
C h a p t e r 3 - U s i n g t h e W e b S e r ve r I n t e r f a c e ( W S I )
For Hub SLM-5650As that are providing the TDM Outbound for a satellite
roaming network, set OSPF to Announcement Only. For roaming
Remotes, set OSPF to Disabled.
Set the parameter fields as described below. For the majority of networks,
the default settings are recommended.
parameter changes will result in a momentary stopping and re-starting of
the OSPF process.
Figure 3-44
Topology
The Topology parameter identifies the network type for the specified
interface, Star or Mesh. Note that this setting is only applicable to Hub
routers; therefore, this field is active only when the Working Mode is set to
either Vipersat Hub or Multipoint Hub.
A d d i t i o n a l R o u t i n g C o n f i g u r a t io n
OSPF Parameters Page
3-41