Figure 3-7 Fast Features Page - Comtech EF Data Vipersat SLM-5650A User Manual

M e n u D e s c r i p t i o n s
Verify whether or not the Vipersat FAST Feature is
codes are entered per customer order prior to shipment from the factory;
however, if the feature displays as
have to be re-entered to enable the Vipersat features.
The FAST Feature codes are entered using the front panel of the modem
(figure 3-8). With the keypad, select
Utility: FAST -> Configuration -> Enter NP Code
Enter the 20 digit code that is provided by either the network administrator or
Comtech Vipersat Networks Customer Support.
Tip: The FAST Feature codes are generated and stored by the unit serial
Caution: Upgraging the FAST features will cause a modem reboot and
To maintain any parameter changes in flash memory, select Save from the Main
Menu bar.
3-8
Figure 3-7
Figure 3-8
number for the target SLM-5650A. The target unit's serial number can be
found on the rear of the unit chassis, or on the FAST code menu.
reconfiguration of all modem parameters.
FAST Features Page
, an updated FAST code will
Not Installed
Front Panel, SLM-5650A Modem
V i p e r s a t S L M - 5 6 5 0 A U s e r G u i d e
(as shown). The
Installed
.