Setting Vipersat Cdd-56X Operating Parameters; Set The Feature Configuration - Comtech EF Data Vipersat 564L User Manual

Role / Location

Setting Vipersat CDD-56X Operating Parameters

The following is an example of using the CLI to bring a Vipersat CDD-56X
with factory default settings to the configuration which allows the Vipersat
functions to be accessible.

Set the Feature Configuration

The operating parameters that will be configured in the target CDD-56X are, in
part, determined by the role the CDD-56X is to fill in the network, as shown in
table 2-1 and table 2-2.
Use the following procedure to configure a CDD-56X to the network role it is to
fill in a Vipersat network.
1.
C h ap t e r Q u i c k S t a r t C o n f i g u r a t i o n
2 -
Table 2-1
Expansion
Hub No
Hub Yes
Remote Yes
From the Main Menu shown in figure 2-1, select the Administration
command by entering A at the command prompt.
CDD-56X Network Roles and Functions
1
STDMA
SCPC
SCPC
I n i t i a l C o n f i g u r a t io n
Demod
2 3
SCPC SCPC
SCPC SCPC
SCPC SCPC
4
SCPC
SCPC
SCPC
2-3