Configuration - Comtech EF Data Vipersat SLM-5650A User Manual

Configuration

The ToS switching feature can be configured within the SLM-5650A modem
using either the CLI or the Web user interface. For simplicity, the Web interface
(figure B-5) will be presented in this example.
The remote ToS switching is optioned by selecting 'Enable' or 'Disable'. In addi-
tion to the enable/disable, the menu provides the ability to create a list of ToS
Rules for which a switch will be initiated. In defining these fields, certain char-
acteristics are created depicting what types of switch service connections are
established. These fields are described in table B-2.
Service Name
ToS
Type
Data Rate
Timeout
NOTE Note:
A p p e n d i x B - A u t o m a t i c S w i t c h i n g
Figure B-5
Table B-2
Field Values
Text (20 Chars)
max
1 - 63
64 - 254
Kbps
Seconds
Load switching by the VMS is not affected by enabling ToS detection.
Remote ToS Switching menu
ToS Switching Settings
Description
A user defined ID.
The ToS value for which a switch should occur. Note
that 0 can not be used to set a ToS based switch.
The type of Vipersat switch which will occur for this
ToS value.
The data rate for the switched SCPC link.
The number of seconds of inactivity before the SCPC
circuit will be torn down.
T o S S w i t c h i n g
B-15