Example Implementations; Tos Switching Per Device; Tos Switching Per Traffic Type; Figure B-6 Per Device Tos Switching Example - Comtech EF Data Vipersat SLM-5650A User Manual

T o S S w i t c h i n g

Example Implementations

ToS Switching Per Device

For applications that require an increase in SCPC bit rate for each application
device a separate ToS value must be assigned to each device individually. This
provides granular switching for each device and also allows a mesh connection
to be established for each device independently. Figure B-6 depicts a per device
configuration Example.
Figure B-6
Per Device ToS Switching Example

ToS Switching Per Traffic Type

For applications that only require a single SCPC bit rate, regardless of the
number of active application devices, the same ToS value can be assigned to
each device. This method does not provide granular switching for each device
and a mesh connection will only be setup for the first device that sends packets
with the designated ToS value. Figure B-7 depicts a per traffic type configura-
tion example.
Figure B-7
Per Type ToS Switching Example
B-16 V i p e r s a t S L M - 5 6 5 0 A U s e r G u i d e