Table of Contents
Advertisement
CDD-880 Multi Receiver Router
Ethernet Management
5.4.4.3.3
Admin | FAST
Upgrading the FAST features will cause the unit to reboot with reconfiguration
of all appropriate operating parameters.
IMPORTANT
The CDD-880 incorporates a number of optional features that may be activated by the user after
purchase via Fully Accessible System Topology (FAST) codes, which are special authorization
codes obtained from Comtech EF Data loaded into the unit via the 'Admin | FAST' page (Figure
5-5). These unique access codes may be purchased during normal business hours from Comtech
EF Data.
FAST Configuration
This read-only section displays the CDD-880's available FAST Features and the operational status for
each available option. Each available feature is listed in the Option column. When an option is
enabled, the Status column identifies the option as such along with its operational parameter(s); if an
option is not enabled, the column will display this information accordingly.
FAST Access
The serial number of the unit, required by Comtech EF Data when ordering FAST option
upgrades, is provided here for user reference. Once a 20-digit FAST authorization code is
obtained from Comtech EF Data, enter this code carefully into the FAST Code text box, then
click [Submit]. The unit will either accept or reject the code, and the FAST Configuration
section will refresh to reflect any upgrades in operation.
Figure 5-5. Admin | FAST page
5–9
Revision 0
MN-CDD880
Advertisement
Table of Contents
