Dell PowerConnect W-AirWave 7.6 User Manual page 89

Setting
6. Locate the EAP Options area on the Groups > SSIDs page, and complete the settings.
settings and default values.
Table 57:
Groups > SSIDs > EAP Options Section Field and Default Value
Setting
WEP Key Rotation
Interval (0-10000000 sec)
7. Locate the RADIUS Authentication Servers area on the Groups > SSIDs configuration page and define the
settings. Table 58
Table 58:
Groups > SSIDs > RADIUS Authentication Servers Fields and Default Values
Setting
RADIUS Authentication
Server 1-3
(Cisco WLC, Proxim only)
Authentication Profile Name
(Proxim Only)
Authentication Profile Index
(Proxim Only)
8. Select Save when the security settings and configurations in this procedure are complete.
NOTE: You may need to return to the Groups > Security configuration page to configure or reconfigure RADIUS servers.
9. Locate the RADIUS Accounting Servers area on the Groups > SSIDs configuration page and define the
settings. Table 59
Table 59:
Groups > SSIDs > Radius Accounting Servers Fields and Default Values
Setting
RADIUS Accounting
Server 1-3 (Cisco WLC,
Proxim Only)
Accounting Profile Name
Dell PowerConnect W-AirWave 7.6 | User Guide
Default Description
LEAP+WEP—Combines the two encryption types shown
l
Static CKIP—Cisco Key Integrity Protocol
l
WPA—Wi-Fi Protected Access protocol
l
WPA/PSK—Combines WPA with Pre-Shared Key encryption
l
WPA2—Wi-Fi Protected Access 2 encryption
l
WPA2/PSK—Combines the two encryption methods shown
l
xSec—FIPS-compliant encryption including Layer 2 header info
l
Default Description
120 Time (in seconds) between WEP key rotation on the AP.
describes the settings and default values.
Default Description
Drop-down menu to select RADIUS Authentication servers previously entered on
the Groups > RADIUS configuration page. These RADIUS servers dictate how
None
wireless clients authenticate onto the network.
Sets the Authentication Profile Name for Proxim AP-600, AP-700, AP-2000, AP-
None
4000.
Sets the Authentication Profile Index for Proxim AP-600, AP-700, AP-2000, AP-
None
4000.
describes the settings and default values.
Default Description
Pull-down menu selects RADIUS Accounting servers previously entered on the
Groups > RADIUS configuration page. These RADIUS servers dictate where the AP
None
sends RADIUS Accounting packets for this SSID/VLAN.
None Sets the Accounting Profile Name for Proxim AP-600, AP-700, AP-2000, AP-4000.
Table 57 describes the
Configuring and Using Device Groups | 77