Dell PowerConnect W-AirWave 7.6 User Manual page 24

Widget
Alert Summary
Quick Links
RAPIDS: Acknowledged
RAPIDS: Classification Pie
RAPIDS: Classification Summary
IDS Events
RAPIDS: OS Pie
RAPIDS: OS Summary
12 | Configuring AirWave
Description
The Configuration Compliance pie shows the percentage of devices that are
mismatched, good, unknown, and those with auditing disabled. It also provides a
summary of the total number of devices that are mismatched. Clicking within this pie
chart takes you to the APs/Devices > Mismatch page.
These pie charts are enabled by default.
The Alert Summary table is enabeld by default and provides the number of AirWave
alerts, IDS events, and RADIUS authentication issues over the last 2 hours, the last 24
hours, and the total since the last AirWave reboot.
Click on AirWave Alerts to drill down to more detailed alert information. This
l
information displays in the current page. You can return to the Alert Summary
graph by selecting the Home Overview link.
Click on IDS Events to drill to more detailed event information. This link takes you
l
to the RAPIDS > IDS Events page.
Click on RADIUS Authentication Issues to drill to more detailed RADIUS
l
authentication information. This information displays in the current page. You can
return to the Alert Summary graph by selecting the Home Overview link.
The Quick Links section is enabled by default. This section provides the user with easy
navigation to a specific folder, group, report, or common task.
The Acknowledged RAPIDS Devices pie chart shows the percentage of
acknowledged and unacknowledged RAPIDS that the user has visibility into. The
RAPIDS information appears from the moment a rogue is discovered until it is
deleted. Ignored rogues, however, are not included in this chart.
This chart also displays on the RAPIDS > Overview page.
The RAPIDS: Classification Pie shows the percentage of devices classified as Valid,
Suspected Neighbor, Suspected Valid, Suspected Rogue, Rogue, and Neighbor that
are attached to AirWave. The RAPIDS information appears from the moment a rogue
is discovered until it is deleted. Ignored rogues, however, are not included in this
chart.
This pie chart can also be viewed on the RAPIDS > Overview page.
The RAPIDS: Classification Summary table shows the number of devices classified as
Valid, Suspected Valid, Neighbor, Suspected Neighbor, Suspected Rogue, Rogue,
and Unclassified that are attached to AirWave. In addition, contained rogue
information will appear if Manage rogue AP containment is set to Yes on the RAPIDS
> Setup page.
The RAPIDS information appears from the moment a rogue is discovered until it is
deleted. Note that ignored rogues are not included in this chart.
This table can also be viewed on the RAPIDS > Overview page.
The IDS Events table shows the number and type of attacks logged by the intrusion
detection system over the last 2 hours, the last 24 hours, and the total since the last
AirWave reboot. This is the same table that displays on the RAPIDS > Overview page.
The RAPIDS: OS Pie chart shows the top 9 rogue devices by OS, Others, Unknown,
and Not Scanned. The RAPIDS information appears from the moment a rogue is
discovered until it is deleted. Note that ignored rogues are not included in this chart.
This pie chart can also be viewed on the RAPIDS > Overview page.
The RAPIDS: OS Summary table shows the top 9 rogue devices by OS, Others,
Unknown, and Not Scanned. The RAPIDS information appears from the moment a
rogue is discovered until it is deleted. Note that ignored rogues are not included in
this chart.
This table can also be viewed on the RAPIDS > Overview page.
Dell PowerConnect W-AirWave 7.6 | User Guide