Dell PowerConnect W-AirWave 7.6 User Manual page 315

Figure 237:
Planning Region Drawing and Selection Illustration
2. Draw your polygon as follows:
Left-click to initiate the process. The tool will automatically shade in your provisioning area.
n
Complete the polygon by double-clicking.
n
3. Once you have finished drawing the region, enter a name for the region and select a Region Type of Planning.
Then select OK. The following image displays.
Figure 238:
Autoprovisioning APs
4. Enter the following information into the Autoprovision APs window as described in
Dell PowerConnect W-AirWave 7.6 | User Guide
Table 149:
Using VisualRF | 303