Dell PowerConnect W-AirWave 7.6 User Manual page 147

Setting
Latitude
Longitude
Altitude (meters)
Group
Folder
Auto Detect
Upstream
Device
Automatically
clear Down
Status Message
when device
comes back up
Down Status
Message
AP Group
Installation
Mesh Mode
Administrative
Status
Mode
4. Complete additional settings on the APs/Devices > Manage page, to include H-REAP, certificates, radio
settings, and network settings.
NOTE: For complete listing and discussion of settings applicable only to Dell PowerConnect W-Series devices, see the Dell
PowerConnect W Configuration Guide.
Dell PowerConnect W-AirWave 7.6 | User Guide
Default Device Type
the device
None All
None All
None All
Default Group All
Top All
Yes All
None All
None All
Enable All
Local All
Table 82 describes many of the possible fields.
Description
Text field for entering the latitude of the device. The latitude is used
with the Google Earth integration.
Text field for entering the longitude of the device. The longitude is
used with the Google Earth integration.
Text field for entering the altitude of the device when known. This
setting is used with the Google Earth integration. Specify altitude in
meters.
Drop-down menu that can be used to assign the device to another
Group.
Drop-down menu that can be used to assign the device to another
Group.
Selecting Yes enables automatic detection of upstream device,
which is automatically updated when the device is polled.
Selecting No displays a drop-down menu of upstream devices.
Whether the message entered in the Down Status Message field
should be removed after the device returns to the Up status.
Enter a text message that provides information to be conveyed if the
device goes down.
Enables or disables administrative mode for the device.
Designates the mode in which the device should operate. Options
include the following:
Local
l
H-REAP
l
Monitor
l
Rogue Detector
l
Sniffer
l
Discovering, Adding, and Managing Devices | 135