Dell PowerConnect W-AirWave 7.6 User Manual page 75

Figure 39:
Groups > Basic Page Illustration
3. Define the settings in the Basic and Global Group sections.
default values of this Basic section.
Table 39:
Basic and Global Groups Fields and Default Values
Setting
Name
Missed SNMP
Poll Threshold
(1-100)
Dell PowerConnect W-AirWave 7.6 | User Guide
Default Description
Defined when Displays or changes the group name. As desired, use this field to set the name to
first adding uniquely identify the group by location, vendor, department, or any other identifier (such
the group as Accounting APs, Cisco devices, 802.1x APs, and so forth).
Sets the number of Up/Down SNMP polls that must be missed before AirWave considers
1 a device to be down. The number of SNMP retries and the SNMP timeout of a poll can
be set on the Device Setup > Communication page.
Table 39 describes several typical settings and
Configuring and Using Device Groups | 63