Heat Control Of Fuser Unit - Brother HL-5240 Service Manual

CHAPTER 2 THEORY OF OPERATION
3.7

Heat Control of Fuser Unit

The printer controls the temperature in the fuser unit in order to keep the constant image
quality when printing on any type or size of paper.
< Fixing temperature of each media type >
Plain paper
Plain paper (Small size)
Plain paper (Duplex)
Recycled paper
Recycled paper (Small size)
Recycled paper (Duplex)
OHP
OHP (Small size)
OHP (Duplex)
Thin paper
Thin paper (Small size)
Thin paper (Duplex)
Thick paper
Thick paper (Small size)
Thick paper (Duplex)
Envelope (Thin)
Envelope (Thin, small size)
Envelope (Thin, duplex)
Envelope (Others)
Envelope (Others, small size)
Envelope (Others, duplex)
NOTE:
The values described in the table above are approximate and vary depending on the
conditions such as the operation environment or the like.
Media type
Fixing temperature (°C)
(approximately)
[Full speed / Half speed]
213/185
200/185
195/180
195/180
189/170
189170
185
185
185
195
195
181
200
195
195
200
200
195
220
220
205
2-24 Confidential