Brother HL-5240 Service Manual page 202

CHAPTER 5 DISASSEMBLY AND RE-ASSEMBLY
(7) Push the Hook of the Sub outer chute (indicated by the arrow 7a), and move the Eject
actuator to the direction of 7b.
(8) Lift up the Eject actuator to remove.
(9) Remove the Eject actuator spring.
Eject actuator
Assembling Note:
When assembling the Eject actuator spring, ensure that its direction is correct referring to the
figure below.
Eject actuator spring
Eject actuator spring
Rib
9
8
7b
7a
Fig. 5-15
Eject actuator
Fig. 5-16
5-22
Sub outer chute
Hook
Sub outer chute
Confidential