Brother HL-5240 Service Manual page 315

Title
RESET COUNT CLEAR COVERAGE
CLEAR ERROR HIST
NV-RAM DEBUG NV-RAM HEX PRINT
PPDS SUBSET ON/OFF
TEST MENU FAN TEST
MOTOR TEST
SENSOR TEST
Subtitle
FAN 1=ON/OFF*
MAIN
MOTOR=ON/OFF*
SCAN
MOTOR=ON/OFF*
FRONT
COVER=ON/OFF
T1
KOUTAN=ON/OFF
T2
KOUTAN=ON/OFF
T3
KOUTAN=ON/OFF
REGI-MAE=ON/OFF
REGI-ATO=ON/OFF
EJECT=ON/OFF
T1 PAPER=ON/OFF
T2 PAPER=ON/OFF
T3 PAPER=ON/OFF
MP
PAPER=ON/OFF
DX UNIT=ON/OFF
REAR
COVER=ON/OFF
NEW
TONER=ON/OFF
T2
CONNECT=ON/OFF
T3
CONNECT=ON/OFF
T4
CONNECT=ON/OFF
TONER=ON/OFF
7-27
HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
Description
Initialize average coverage counter.
Initialize error history.
Prints NV-RAM HEX dump.
Supports the PPDS Subset command in the FX
Emulation mode.
Carries out movement test of FANs.
Carries out movement test of main fan, LVPS
fan.
Carries out movement test of main motor.
Carries out movement test of scanner motor.
Front cover sensor (ON: Close)
T1 tail edge sensor
T2 tail edge sensor
T3 tail edge sensor
Regist front sensor
Regist rear sensor
Paper eject sensor
Tray 1 paper sensor
Tray 2 paper sensor
Tray 3 paper sensor
MP Tray paper sensor
The DX unit is closed. (ON: Close)
Back cover sensor (ON: Close)
New toner sensor
Tray 2 connect sensor
Tray 3 connect sensor
Tray 4 connect sensor
Toner sensor (ON: Light reception)
Confidential