Error Message; Operator Calls; Operator Calls For Hl-5240/5250Dn - Brother HL-5240 Service Manual

CHAPTER 4 TROUBLESHOOTING
2.

ERROR MESSAGE

2.1

Operator Calls

2.1.1

Operator calls for HL-5240/5250DN

When an operator call occurs, the red Status LED blinks to indicate. An 'operator call' which
the printer indicates on the LEDs is user recoverable. Identify the error from the table below
and take the corrective action described for each indication to correct it. The printer
automatically recovers from most errors. If not, the error is cleared by holding down the Go
button.
LED Type of error
Toner low
Toner life end
Cartridge position
error
Drum near end
No paper fed tray
Paper jam
Incorrect Paper size
for Duplex
(HL5250DN/5270DN/
5280DW)
Duplex disabled
4-4
Error clearance
by pressing the
Go button.
The Toner LED will turn on for
2 seconds and off for 3
seconds. Replace the toner
cartridge.
---
Replace the toner cartridge
N/A
with a new one.
The drum unit ASSY is not
installed correctly. Put the
drum unit ASSY back in.
N/A
The drum unit is near the end
of its life. We recommend that
you get a new drum unit to
replace the current one. The
---
Drum LED will turn on for 2
seconds and off for 3 seconds.
Put paper in the tray. Press the
N/A
Go button.
Clear the paper jam. If the
printer does not start printing,
N/A
press the Go button.
Press the Go or Job Cancel.
Set the correct paper that you
want to use, or load the same
paper size paper that you
Yes
selected in the current driver
setting. The paper size you
can use doe automatic duplex
printing is A4, Letter or Legal.
Close the back cover of the
Yes printer and put the duplex tray
back in.
Remedy
Confidential