Rap 2 Error Messages - Xerox Phaser 3435 Service Manual

Status Indicator RAPs

RAP 2 Error Messages

Message
Door Open
Duplex Jam 0 Check
Inside
Duplex Jam 1 Open/
Close Door
Fuser Door Open
Install Toner
Invalid Toner
Load Manual Press
Stop Key
Low Heat Error Cycle
Power
LSU Hsync Error Cycle
Power
LSU Motor Error Cycle
Power
Main Motor Locked
Open Heat Error Cycle
Power
Over Heat Error Cycle
Power
Paper Jam 0 Open/
Close Door
Paper Jam 1 Open/
Close Door
Paper Jam 2 Check
Inside
Printing...
Ready
Replace Toner
2-4
Meaning
The front cover or rear cover is not
securely latched.
Paper has jammed during duplex
printing.
Paper has jammed during duplex
printing.
The fuser door is not securely
latched.
A print cartridge is not installed.
The print cartridge you have installed
is not for your printer.
The multi-purpose tray is empty in
manual feed mode.
There is a problem in the fuser unit.
A problem has occurred in the LSU
(Laser Scanning Unit).
A problem has occurred in the LSU
(Laser Scanning Unit).
There is a problem in the main motor. Open and then close the front cover.
There is a problem in the fuser unit.
There is a problem in the fuser unit.
Paper has jammed in the feeding
area of the tray.
Paper has jammed in the fuser area. Clear the jam.
Paper has jammed in the paper exit
area.
The printer is printing jobs using the
displayed language.
The printer is on-line and ready to
printer.
This message appears between the
Toner Empty and Toner Low status.
Suggested solutions
Close the cover until it locks into place.
Clear the jam.
Clear the jam.
Open the rear cover and close the fuser door
until it locks into place. For the location of the
fuser door.
Install a print cartridge.
Install a genuine print cartridge, designed for
your printer.
Load a sheet of print material and press OK.
Replace to Fuser Unit.
Replace to LSU Unit.
Replace to LSU Unit.
Unplug the power cord and plug it back in. If
the problem persists, please call for service.
Unplug the power cord and plug it back in. If
the problem persists, please call for service.
Clear the jam.
Clear the jam.
Complete your printing.
Use your printer.
Replace the print cartridge with a new one.
5/08 Phaser 3435