Rep 4 Fuser Assembly - Xerox Phaser 3435 Service Manual

REP 4 Fuser Assembly

Parts List on: PL 13
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Do not touch the fuser while it is hot.
1. Before removing the Fuser Assembly, open the face up cover and open the guide output
fuser. Rear Cover,
2. Remove the four screws securing the Fuser Assembly and then pull the Fuser Assembly.
Phaser 3435
and PL 14
REP 3.
WARNING
WARNING
Figure 1
5/08
Repairs and Adjustments
Fuser assembly
4-11