Rep 24 Terminal - Xerox Phaser 3435 Service Manual

REP 24 Terminal

Parts List on: PL 7
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
1. Before removing the CRUM 2 PBA, remove the:
-Top Cover, REP
-Side Cover, REP
-LSU, REP 23.
2. Remove the one screw securing the CRUM 2 PBA and remove it and then release the four
Terminals, as shown below.
Note: Be aware of the Terminals to ensure they are not lost.
3-28
Phaser 3435
5.
7.
CRUM2 PBA
Terminal
WARNING
Figure 1
5/08
Repairs and Adjustments
4-57