Xerox Phaser 3435 Service Manual page 28

Status Indicator RAPs
2. Remove the jammed paper by gently pulling it straight out. Make sure that all of the paper is
properly aligned in the tray 1.
If the paper is not move when you pull, or if you do not see the paper in this area, check the
fuser area around the print cartridge.
3. Insert the tray 1 into the printer until it snaps into place. Printing automatically resumes.
In the Optional Tray 2
1. Pull the optional tray 2 open.
2. Remove the jammed paper from the printer.
If the paper is not move when you pull, or if you do not see the paper in this area, stop and go
to step 3.
3. Pull the tray 1 half.
4. Pull the paper straight up and out.
2-8
Figure 2
Figure 3
5/08 Phaser 3435