Connecting The Km-Net Remote Operation Panel Utility To The Printer - Kyocera FS-1020D Operation Manual

1.3.2 Connecting the KM-NET Remote Operation Panel Utility to the
Printer
The KM-NET Remote Operation Panel utility can be used whenever the
printer is connected to the computer via the parallel, USB or serial
interface, or through a network interface (TCP/IP or IPX/SPX).
To establish the connection to the printer, proceed as follows:
1
Click the CONNECT button on the start-up screen.
2
On the connection wizard:
a.Click Local Printer to connect to a locally attached printer.
b.Click Network Printer to connect to a network printer.
3
Depending on the connection type you have chosen above, follow the
instructions displayed by the wizard.
1-15
Printer Configuration
Local Printer
Network Printer