Paper Type - Kyocera FS-1020D Operation Manual

4.4

Paper Type

The printer is capable of printing under the optimum setting for the type of
paper being used.
Setting the paper type for the paper source by using the KM-NET Remote
Operation Panel utility will cause the printer to automatically select the
paper source and print in the mode best suited to that type of paper.
A different paper type setting can be made for each paper source including
the MP tray. Not only can preset paper types be selected, but it is also
possible for you to define and select customized paper types. See section
1.4.8 Custom Paper Type Settings
Not all paper types are available to feed from the paper cassette. Certain
types of paper should be fed using the MP tray. See the table below.
Paper Source
Paper Type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
†
Custom 1 (to 8)
Table 4-5
†
This is a paper type defined and registered by the user. Up to eight types of user
settings may be defined. For details, see section
Settings on page 1-28.
on page 1-28.
MP Tray Paper
Cassette
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes Yes
Yes
: Can be stored
4-11
Paper Type
Paper Weight
Normal 2
Extra heavy
Normal 2
Normal 2
Normal 2
Normal 2
Light
Heavy 1
Heavy 1
Heavy 2
Heavy 1
Heavy 3
Heavy 2
Heavy 2
Normal 2
No
: Cannot be stored
1.4.8 Custom Paper Type