Normal Indicator Display - Kyocera FS-1020D Operation Manual

3.3.4

Normal Indicator Display

Indicator
Table 3-6
The following displays appear during normal printer operation.
Remote Operation
Panel display
Cancelling data
Please wait
Processing
Processing
Waiting
Form Feed Timeout
Ready
Sleeping
Data inside the printer is being canceled.
The indicators light in sequence from the top, then
go off in sequence from the bottom. This process is
repeated twice.
When the printer is switched on for the first time
after the toner container is installed, (Adding
toner) also appears.
The printer is warming up and is not ready to print.
The indicators light in sequence twice from top to
bottom.
When the printer is switched on for the first time
after the toner container is installed, (Adding
toner) also appears.
The printer is receiving data.
The printer is processing data.
The printer is waiting for the end-of-job command
before printing the last page. Pressing the
allows you to obtain the last page immediately.
The printer is printing the last page after a waiting
period.
The printer is ready to print.
The printer is offline. The printer stores but does
not print received data.
The printer is in sleep mode. The
flashes at 5-second intervals and all other
indicators go off. The printer wakes from Sleep
mode whenever a key on the operator panel is
pressed, the cover is opened or closed, or data is
received. The printer then warms up and goes
online. (You can set the amount of time before the
printer enters sleep mode from the KM-NET
Remote Operation Panel utility.)
3-14
Indicators
Description
indicator
key