System Menu; Clear Set Memory; Diagnostic Mode - Oce TDS400 User Manual

System menu

To enter the System menu you need a password. The password for the System
menu is:

Clear set memory

The set memory indicates the available memory. If an error occurs, for example
the set memory reaches its limits, you must clear the set memory.
Clear set memory
Press the 'on line' button to put the printer off line.
1
Select the 'System
2
Press 'next/select' to enter the 'System' menu.
3
Enter the password to get access.
4
Select the 'Clear setmem' item with the
5
Press 'next/select' to enter the 'Clear setmem' menu.
6
Select 'Yes'or 'No' with the
7
Press 'next/select' to confirm the setting.
8
Press 'on line' to put the printer on line again.
9
Turn 'off' and 'on' the controller.
10

Diagnostic mode

The Diagnostic mode is only meant for the Océ service technician.
Use the Océ TDS400 to print
stops' .
item with the
'
or
or button.
or button.
button.
37