Smb Settings; Opening The Smb Setting Menu Display - Oce fx2081 User Manual

SMB settings

These settngs are requred f your LAN uses "NetBIOS over TCP/IP" protocol.
NOTE
Contact your network admnstrator f you are unsure about ths settng.
IMPORTANT
In order to actvate new settngs, the machne must be rebooted after the new set-
tngs have been entered. Turn the machne "Off" and after three or more seconds,
turn the machne back "On".

Opening the SMB setting menu display

1
Press <Settng> on the control panel.
2
Press [Management].
3
Press [Network Settngs].
9-36 n
Etwork SEttingS