Turning The Scanner Off With The Toggle Power Switch; Turning The Scanner Off With The Rocker Power Switch; Starting The Application Software; Exiting The Application Software - Kodak PS50 Series User Manual

Turning the scanner
off with the toggle
power switch
Turning the scanner
off with the rocker
power switch
Starting the
application software
Exiting the
application software
2-6
To turn the scanner off, press the toggle button for 1 second.
NOTE: The Power Off energy saver feature will also turn the scanner
off after an extended period of time after the scanner is in power
saver mode. The default is 60 minutes, however, you can
configure this period of time via your scanning application. Valid
values are 0-240 minutes.
If your scanner has the rocker power switch, press the button on the
back of the scanner to the Off (O) position.
1. Turn on any Kodak flatbed accessories before starting the
application.
2. Double-click on the application shortcut on your desktop or select
Start>Programs>Kodak>KODAK Picture Saver System>Picture
Saver System PS50. The Customer Information screen will be
displayed.
• Click the Exit icon in the lower right-hand corner on most screens or
click the Close box in the upper right-hand corner.
A-61760 September 2012