NordicTrack 24927.0 User Manual page 29

SYMPTOM: The iFit mode does not function
correctly
a. If the iFit mode is not functioning correctly, make
sure that the incline trainer has the most current
firmware available (see page 23).
SYMPTOM: The incline of the incline trainer does
not change correctly
a. Hold down the Stop button and the Speed increase
button, insert the key into the console, and then
release the Stop button and the Speed increase
button. Next, press the Stop button and then press
the Incline increase or decrease button. The incline
trainer will automatically rise to the maximum
incline level and then return to the minimum level.
This will recalibrate the incline system. If the incline
system does not begin calibrating, press the Stop
button again, and then press the Incline increase or
decrease button again. When the incline system is
calibrated, remove the key from the console.
SYMPTOM: The incline trainer will not connect to
the wireless network
a. Make sure that the wireless settings on your con-
sole are correct (see step 3 on page 22).
b. Make sure that the settings for your wireless net-
work are correct.
c. If you still have questions, see the front cover of
this manual.
SYMPTOM: The incline trainer will not connect to a
tablet
a. Make sure that the wireless settings on your con-
sole are correct (see step 3 on page 22).
b. Make sure that the settings for your wireless net-
work are correct.
c. Make sure that your console and tablet are con-
nected to the same network.
d. If you still have questions, see the front cover of
this manual.
29