NordicTrack commercial 2450 Manual

NordicTrack commercial 2450 Manual

English manual
Hide thumbs Also See for commercial 2450:
Table of Contents

Advertisement

www.nordictrack.com
USER’'S MANUAL
Model No. NTL19112.1
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go
to www.nordictrackservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800- 862-3348)
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

Advertisement

Table of Contents
loading

Summary of Contents for NordicTrack commercial 2450

  • Page 1 USER’’S MANUAL Model No. NTL19112.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.nordictrackservice.com/ registration. CUSTOMER CARE For service at any time, go to www.nordictrackservice.com.
  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decals may not be shown at actual size. NORDICTRACK is a registered trademark of ICON IP, Inc.
  • Page 3: Important Precautions

    16. To purchase a surge suppressor, see your local 4. The treadmill is intended for home use only. NORDICTRACK dealer, call the telephone Do not use the treadmill in any commercial, number on the front cover of this manual, or rental, or institutional setting.
  • Page 4 20. The heart rate monitor is not a medical 28. Over exercising may result in serious injury device. Various factors, including the user’’s or death. If you feel faint or if you experience movement, may affect the accuracy of heart pain while exercising, stop immediately and rate readings.
  • Page 5 34. Upon completion of any service or repairs to 38. Use a jumper wire not smaller than No. 6 the treadmill or the television, ask the ser- AWG (13.3 mm ) copper, or the equivalent, vice technician to perform safety checks to when a separate antenna-grounding elec- confirm that the unit is in proper operating trode is used.
  • Page 7 STANDARD SERVICE PLANS...
  • Page 8: Before You Begin

    COMMERCIAL 2450 treadmill. The manual. To help us assist you, please note the product ® COMMERCIAL 2450 treadmill offers an impressive model number and serial number before contacting us. selection of features designed to make your work- The model number and the location of the serial num- outs at home more enjoyable and effective.
  • Page 9: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
  • Page 10: Assembly

    ASSEMBLY •• Assembly requires two persons. •• To identify small parts, see page 9. •• Place all parts in a cleared area and remove the •• Assembly requires the following tools: packing materials. Do not dispose of the packing materials until you  nish all assembly steps. the included hex key ••...
  • Page 11 3. Identify the Left and Right Base Covers (90, 97). Slide the Left Base Cover (90) onto the left Upright (93). Slide the Right Base Cover (97) onto the right Upright. Then, press the Left and Right Base Covers (90, 97) downward until they snap into place.
  • Page 12 5. Insert the wires and cable into the Upright (93) as you set the console assembly on the Upright. Be careful not to pinch the Upright Wire (88) Console or the Upright Coaxial Cable (114). Assembly Attach the console assembly with four 5/16" x 1 1/2"...
  • Page 13 7. Hold the TV assembly near the console assem- TV Assembly bly, and connect the wires. Insert the excess wires into the bracket on the TV assembly. Attach the TV assembly to the back of the con- sole assembly with four 1/4" x 1 1/4" Screws (7). Make sure not to pinch any wires.
  • Page 14 9. Attach the upper end of the Storage Latch (68) to the Frame (66) with a 3/8" x 1 3/4" Bolt (6) and a 3/8" Nut (10). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the Frame.
  • Page 15: The Chest Heart Rate Monitor

    THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR •• Do not expose the heart rate monitor to direct sun- light for extended periods of time; do not expose it The heart rate to temperatures above 122° F (50° C) or below 14° monitor consists of F (-10°...
  • Page 16: Operation And Adjustment

    OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’’s...
  • Page 17 Before operating the TV, you must connect an antenna or a 75 ohm CATV cable to the 75 ohm terminal, an AV cable to the audio/video input jack, or an HDMI cable to the HDMI input jack. Note: Use a CATV cable to connect to an external source such as a cable box, satellite TV box, VCR, or analog cable.
  • Page 18 HOW TO CONNECT A VCR, DVD PLAYER, OR HOW TO CONNECT A DVD OR BLU-RAY PLAYER OTHER DEVICE USING AN AV CABLE OR OTHER DEVICE USING AN HDMI CABLE 1. Connect the three-pronged end of an RCA AV 1. Connect one end of an HDMI Cable to your DVD or Cable to your VCR, DVD player, or other device.
  • Page 19 CONSOLE DIAGRAM MAKE YOUR FITNESS GOALS A REALITY WITH FEATURES OF THE CONSOLE IFIT.COM The advanced treadmill console offers an array of fea- With your new iFit-compatible fitness equipment, you tures designed to make your workouts more effective can use an array of features on iFit.com to make your and enjoyable.
  • Page 20 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to The console features a tablet with a full-color touch cold temperatures, allow it to warm to room tem- screen. The following information will help you become perature before you turn on the power.
  • Page 21 HOW TO SET UP THE CONSOLE The console is now ready for you to begin working out. The following pages explain the various workouts and Before using the treadmill for the first time, set up the other features that the console offers. console.
  • Page 22 HOW TO USE THE MANUAL MODE Each time you press one of the buttons, the incline will gradually change until it reaches the selected 1. Insert the key into the console. incline setting. See HOW TO TURN ON THE POWER on page Note: The first time you adjust the incline, you must 20.
  • Page 23 If desired, adjust the volume by pressing the Vol 7. Turn on the fan if desired. increase and decrease buttons on the console near the TV controls. The fan features several speed settings and an auto mode. When the auto mode is selected, To pause the workout, touch one of the menu but- the speed of the fan will automatically increase tons or press the Stop button on the console.
  • Page 24 HOW TO USE AN ONBOARD WORKOUT If the speed and/or incline settings are too high or too low at any time during the workout, you can 1. Insert the key into the console. override the settings by pressing the Speed or Incline buttons.
  • Page 25 HOW TO USE A SET-A-GOAL WORKOUT The workout will function in the same way as the manual mode (see pages 22 and 23). 1. Insert the key into the console. The workout will continue until you reach the goal See HOW TO TURN ON THE POWER on page 20. that you set.
  • Page 26 HOW TO USE AN IFIT WORKOUT Before some workouts will download, you must add them to your schedule on iFit.com. Note: To use an iFit workout, you must have access to a wireless network (see HOW TO USE THE For more information about the iFit workouts, WIRELESS NETWORK MODE on page 30).
  • Page 27 HOW TO USE THE EQUIPMENT SETTINGS MODE IMPORTANT: You must still unplug the power cord after using the treadmill. Set the update 1. Select the settings main menu. time for a time when you normally use the treadmill and will be available to unplug the Insert the key into the console power cord after an update.
  • Page 28 11. Enable or disable a passcode. 12. Set a safety screen timeout. The console features a child-safety passcode, The console features an automatic screen reset; if designed to prevent unauthorized users from using no buttons are touched or pressed and the walking the treadmill.
  • Page 29 HOW TO USE THE MAINTENANCE MODE 4. Calibrate the incline system of the treadmill. 1. Select the settings main menu. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. See step 1 on page 27. The treadmill will automatically rise to the maxi- mum incline level, lower to the minimum incline 2.
  • Page 30 HOW TO USE THE WIRELESS NETWORK MODE An information box will ask if you want to connect to the wireless network. Touch the Connect button The console features a wireless network mode that to connect to the network or touch the Cancel but- allows you to set up a wireless network connection.
  • Page 31 HOW TO USE THE STEREO SOUND SYSTEM HOW TO ADJUST THE CUSHIONING SYSTEM To play music or audio books through the console’’s Remove the key from the console and unplug the speakers, you must connect your MP3 player, CD power cord. The treadmill features a cushioning sys- player, or other personal audio player to the console.
  • Page 32 HOW TO OPERATE THE TV 5. Mute the TV if desired. The TV can be controlled using the Press the Mute button to silence the TV’’s audio control buttons found on the tread- output. Press the button again or adjust the volume mill console, the buttons located on to turn the TV off of mute.
  • Page 33 HOW TO USE THE REMOTE CONTROL Press the Display button to view information about the current program and the broadcast or cable signal. The first time you use the remote control, insert batteries (see HOW TO Press the CC button repeatedly to turn on or turn off REPLACE THE BATTERIES IN THE closed captioning.
  • Page 34 HOW TO ADJUST THE TV SETTINGS 4. Adjust the channel settings. The TV has a menu that allows you to adjust and per- The Channel menu allows you to save channels sonalize television settings. in the TV memory and select settings for chan- nels.
  • Page 35 5. Adjust the parental control settings. Select Menu Language to change the language used in the menus. The Parental menu allows you to block or allow various settings on the TV. Select Clock to adjust the TV clock’’s time zone, auto setting, time setting, day of the week setting, First, enter the Lock Parental Code password, and daylight saving time setting.
  • Page 36: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero percent before you fold the treadmill. left.
  • Page 37: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by follow- d. If the treadmill still will not run, please see the front ing the simple steps below. Find the symptom that cover of this manual. applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual.
  • Page 38 SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifications described on page 16. a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD.
  • Page 39 SYMPTOM: The television is not receiving a signal c. Check for the problems listed below and follow the applicable instructions. a. Make sure that the correct TV or AV source is selected. See step 2 on page 32 to select a televi- ••...
  • Page 40: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
  • Page 41 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch ——never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
  • Page 42: Part List

    PART LIST Model No. NTL19112.1 R0113A Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Walking Belt 5/16" x 3/4" Screw Foot Rail Insert 5/16" x 1 1/2" Screw Cushion Lock 5/16" x 2" Screw Left Foot Rail Base 5/16"...
  • Page 43 Key No. Qty. Description Key No. Qty. Description Plastic Stand-off Cable Tie Mounting Bracket TV Bracket Cover Console TV Trim Fan Assembly Upright Coaxial Cable Handrail Spacer Console Frame TV Remote Control Pulse Bar Top TV Bracket Pulse Bar Bottom M4 x 12mm Pulse Ground Wire ––...
  • Page 44: Exploded Drawing

    EXPLODED DRAWING A Model No. NTL19112.1 R0113A...
  • Page 45 EXPLODED DRAWING B Model No. NTL19112.1 R0113A...
  • Page 46 EXPLODED DRAWING C Model No. NTL19112.1 R0113A...
  • Page 47 EXPLODED DRAWING D Model No. NTL19112.1 R0113A...
  • Page 48 ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...

This manual is also suitable for:

Ntl19112.1

Table of Contents