Table of Contents
Advertisement
www.nordictrack.com
USER'S MANUAL
Model No. 24917.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-800-TO-BE-FIT
(1-800-862-3348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for NordicTrack 2150 Treadmill
Summary of Contents for NordicTrack 2150 Treadmill
- Page 1 USER’S MANUAL Model No. 24917.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decals may not be shown at actual size. NORDICTRACK is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
14. To informed of all warnings and precautions. purchase a surge suppressor, see your local NORDICTRACK dealer, call the telephone 3. Use the treadmill only as described. number on the front cover of this manual, or see your local electronics store. - Page 4 DANGER 20. Never leave the treadmill unattended while : Always unplug the power it is running. Always remove the key, unplug cord immediately after use, before clean- the power cord, and press the power switch ing the treadmill, and before performing the into the off position when the treadmill is not maintenance and adjustment procedures in use.
-
Page 5: Before You Begin
Thank you for selecting the revolutionary reading this manual, please see the front cover of this NORDICTRACK C 2150 treadmill. The C 2150 tread- manual. To help us assist you, please note the product ® mill offers an impressive selection of features designed model number and serial number before contacting us. -
Page 6: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 7: Assembly
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 6. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing materials until you finish all assembly steps. the included hex key •... - Page 8 3. Identify the Left Upright (89), which is marked “Left.” Have a second person hold the Left Upright near the Base (97). See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Wire Upright Wire (84).
- Page 9 5. Identify the Left and Right Base Covers (92, 93), which are marked “Left” and “Right.” Slide the Left Base Cover onto the Left Upright (89). Slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet.
- Page 10 7. Insert the wires into the Left Upright (89) as you set the console assembly on the Left and Right Uprights (89, 90). Be careful not to pinch the Console Upright Wire (84). Assembly Attach the console assembly with four 5/16" x 1 1/2"...
- Page 11 9. Firmly tighten the four 3/8" x 2 3/4" Screws (7), and then tighten the four 3/8" x 1 1/4" Screws (8) (only one side is shown). Press the Left and Right Base Covers (92, 93) onto the Base (97) until they snap into place. 10.
- Page 12 11. Attach the upper end of the Storage Latch (53) to the Frame (56) with a 3/8" x 1 3/4" Bolt (6) and a 3/8" Nut (11). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the Frame.
-
Page 13: The Chest Heart Rate Monitor
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR • Do not expose the heart rate monitor to direct sunlight for extended periods of time; do not expose The heart rate it to temperatures above 122° F (50° C) or below 14° monitor consists of F (-10°... -
Page 14: Operation And Adjustment
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit. - Page 15 CONSOLE DIAGRAM FEATURES OF THE CONSOLE As you exercise, the console will display instant ex- ercise feedback. You can also measure your heart The treadmill console offers an impressive array of rate using the handgrip heart rate monitor or the chest features designed to make your workouts more effec- heart rate monitor.
- Page 16 HOW TO USE THE TOUCH SCREEN HOW TO TURN ON THE POWER The console features a tablet with a full-color touch IMPORTANT: If the treadmill has been exposed to screen. The following information will help you become cold temperatures, allow it to warm to room tem- familiar with the device’s advanced technology: perature before you turn on the power.
- Page 17 HOW TO SET UP THE CONSOLE Note: For information about navigating in the browser, see page 26. The browser will open to the Before using the treadmill for the first time, set up the iFit.com home page. Touch the Register button in console.
- Page 18 HOW TO USE THE MANUAL MODE Note: The first time you adjust the incline, you must first calibrate the incline system (see step 4 1. Insert the key into the console. on page 24). For your safety, as you adjust the incline setting to negative levels, the maximum speed of the treadmill will decrease at set See HOW TO TURN ON THE POWER on page...
- Page 19 most accurate heart rate reading, continue to The displays at the top of the screen can show two types of information. Touch each display until the hold the contacts for about 15 seconds. display shows the desired information. 7. Turn on the fan if desired. If desired, adjust the volume by pressing the The fan features multiple speed settings and an...
- Page 20 HOW TO USE AN ONBOARD WORKOUT If the speed and/or incline settings are too high or too low at any time during the workout, you can 1. Insert the key into the console. override the settings by pressing the Speed or Incline buttons.
- Page 21 HOW TO USE A SET-A-GOAL WORKOUT The workout will function in the same way as the manual mode (see pages 18 and 19). 1. Insert the key into the console. The workout will continue until you reach the goal See HOW TO TURN ON THE POWER on page that you set.
- Page 22 HOW TO USE AN IFIT WORKOUT Before some workouts will download, you must add them to your schedule on iFit.com. Note: To use an iFit workout, you must have ac- For more information about the iFit workouts, cess to a wireless network (see HOW TO USE THE please see www.iFit.com.
- Page 23 HOW TO USE THE EQUIPMENT SETTINGS MODE the power cord, press the power switch into the reset position, and insert the key into the console. 1. Select the settings main menu. However, when you remove the key, the screen will show a demo presentation.
- Page 24 12. Set a safety screen timeout. The screen will show the progress of the update. When the update is complete, the treadmill will turn The console features an automatic screen reset; if off and then turn back on. If it does not, press the no buttons are touched or pressed and the walking power switch into the off position.
- Page 25 HOW TO USE THE WIRELESS NETWORK MODE An information box will ask if you want to connect to the wireless network. Touch the Connect button The console features a wireless network mode that al- to connect to the network or touch the Cancel but- lows you to set up a wireless network connection.
- Page 26 HOW TO USE THE STEREO SOUND SYSTEM HOW TO USE THE INTERNET BROWSER To play music or audio books through the console’s Note: To use the browser, you must have access to speakers, you must connect your MP3 player, CD a wireless network including an 802.11b/n router with player, or other personal audio player to the console.
-
Page 27: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the in- Before moving the treadmill, fold it as described at the cline to zero percent before you fold the treadmill. left. -
Page 28: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following c. Remove the key from the console, and then the simple steps below. Find the symptom that reinsert it. applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. d. - Page 29 SYMPTOM: The walking belt slows when walked on Lower the treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 27). Remove the three #8 x 3/4" Screws (1). Carefully pivot the a. Use only a single-outlet surge suppressor that Motor Hood (71) off.
- Page 30 SYMPTOM: The walking belt is off-center or slips SYMPTOM: The iFit mode does not function cor- when walked on rectly a. If the walking belt is off-center, first remove the a. If the iFit mode is not functioning correctly, make key and UNPLUG THE POWER CORD.
-
Page 31: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 32: Suggested Stretches
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. - Page 33 NOTES...
-
Page 34: Part List
PART LIST Model No. 24917.0 R1112A Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Reed Switch Clamp 5/16" x 3 3/4" Screw Reed Switch 3/8" x 2" Bolt Storage Latch 5/16" x 2" Screw Drive Motor 5/16"... - Page 35 Key No. Qty. Description Key No. Qty. Description Wheel Pulse Ground Wire Console Base Pulse Bar Bottom Console 1/2" Rear Leveling Foot Nut Console Back 3/8" Flat Washer Fan Assembly #8 x 3/8" Screw Handrail Spacer Short Hex Key Console Frame –...
-
Page 36: Exploded Drawing
EXPLODED DRAWING A Model No. 24917.0 R1112A... - Page 37 EXPLODED DRAWING B Model No. 24917.0 R1112A...
- Page 38 EXPLODED DRAWING C Model No. 24917.0 R1112A 101 112...
- Page 39 EXPLODED DRAWING D Model No. 24917.0 R1112A...
-
Page 40: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...