Table of Contents
Advertisement
4 Remove the rear tray by sliding it forward about 1.5 cm (
lifting it up and out. Store the tray in a safe place, for you may need
it to install a hard disk drive at a later date.
5 Hold the board horizontally by its "top" edge. Slide it into the board
guide of the chosen slot. Do not bend the board.
6 Align the board's connector with the slot's socket and firmly press
into the socket. Ensure the board's connector engages completely
with the socket and does not touch components on other boards.
7 Secure the board by replacing the retaining bracket at the rear of the
PC. Ensure that the accessory board is correctly aligned and firmly
secured by the bracket.
8 The accessory board may need a special connection. Refer to page
26 for more information.
9 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
1 How to Install Accessories In Your PC
Installing Accessory Boards
½
inch) and
English
29
Hide quick links:
Advertisement
Table of Contents
