HP Vectra VL series 8 Maintenance Manual page 29

5 Push the two catches (indicated by
the front drive unit down and then slide the unit out, holding it with
both hands.
6 Carefully place the unit on its side and remove the top mounting
bracket. Remove the metal filler plate from the empty shelf if there
is one.
7 If the drive to install has a tray, attach the drive onto the tray. Many
devices, such as the HP Zip drive, require an HP-supplied tray before
they can be installed. CD-ROM drives do not require a tray.
Attach drive to tray
(This example shows a Zip drive)
8 Lower the drive into the free groove of the mounting bracket (ensure
that the top of the drive is facing the right way). Use the two pins on
the mounting bracket to slot the drive into place.
1 How to Install Accessories In Your PC
Installing Mass Storage Devices
on the label on your PC) on
English 19