HP Vectra VL series 8 Maintenance Manual page 30

1 How to Install Accessories In Your PC
Installing Mass Storage Devices
9 Position the other mounting bracket on top, aligning it properly so
that it clicks into place.
10 Draw the computer's data cable through the front drive bay area and
connect the data cable to the rear of each drive.
The connectors are shaped to fit one way only. If you are not sure
which connector to use, refer to "Connecting Devices", on page 9.
11 Using both hands, lift the drive unit and slide it back into the
computer about halfway.
12 Remove the power supply and place it upside down on the front
drive unit.
20 English