Ring Down/Hot Line/Off-Hook Preference
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A confirmation
tone will sound and the Auto Redial function is cancelled.
SINGLE LINE TELEPHONE
Not applicable
Ring Down/Hot Line/Off-Hook Preference
If your phone has been programmed for Off-Hook Preference, you can
access an outside line or a system feature by going off-hook or pressing
the ON/OFF button (SPEAKER button on IP Phone). It simulates the
depression of a specific button and can be programed by a station user
or a database administration programmer using code [691] + the
button number.
While Off-Hook Preference is enabled, you may access
internal intercom dial tone as follows:
1.
Press the preprogrammed ICM button,
-or-
Dial your intercom number. (Do not lift the handset or press the
ON/OFF button, or SPEAKER button on IP Phone, before dialing
intercom number.) The LED will light steady and an intercom dial
tone will sound.
2.
Dial an internal station or feature access code.
Off-Hook Preference Programming (Via a Station)
If your phone is programmed for Off-Hook Preference and you were
given the ability to enable or change the prime flexible button:
1.
Dial [691] on the dial pad.
2.
Dial desired flexible button number (01-30).
To disable Off-Hook Preference:
1.
Dial [691] on the dial pad.
2.
Dial [00] on the dial pad.
XTS-IP / XTSc-IP Station User Guide
101
March 2007