Replacing The Chassis Intrusion Switch - Dell OptiPlex GX60 System User's Manual

Back to Contents Page
Chassis Intrusion Switch
Dell™ OptiPlex™ GX60 Systems User's Guide
Replacing the Chassis Intrusion Switch
Resetting the Chassis Intrusion Detector

Replacing the Chassis Intrusion Switch

CAUTION: Before you begin any of the procedures in this section, follow the
1. Follow the procedures in "Before You
2. Disconnect the chassis intrusion switch cable from the control panel on the front of the computer.
Note the routing of the chassis intrusion cable as you remove it from the chassis. Chassis hooks may hold the cable in place inside the chassis.
3. Slide the chassis intrusion switch out of its slot, and remove the switch and its attached cable from the computer.
Small Form-Factor Computer
Small Desktop Computer
Begin."
safety instructions.