Adding Or Editing A Custom Service - Cisco Small Business RV220W Administration Manual

Firewall
Advanced Firewall Settings
STEP 1
STEP 2
Cisco RV220W Administration Guide

Adding or Editing a Custom Service

Use the Add/Edit Custom Services Configuration page to enter the settings for a
custom service.
To open this page: From the Firewall > Advanced Settings > Custom Services
page, click Add or select a service and then click Edit.
Enter these settings:
• Name—Enter a service name for identification and management purposes.
• Type—Choose layer 4 protocol that the service uses (TCP, UDP, ICMP,
ICMPv6, or other).
- If you chose ICMP or ICMPv6 as the service type, specify the ICMP type
by entering its numeric value (from 0 through 40 for ICMP and from 0
through 255 for ICMPv6).
- If you chose TCP or UDP, enter the first TCP or UDP port of the range that
the service uses. In the Finish Port field, enter the last TCP or UDP port
of the range that the service uses.
- If you chose Other, enter the number of the protocol in the Protocol
Number field. (For example, if you are using RDP, enter 27 in the protocol
number field.)
Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the Firewall > Advanced Settings >
Custom Services page.
4
88