Table of Contents
Advertisement
7000 and 8000 Series Device High Availability
Editing Device High Availability
Smart License
N/A
After you establish a 7000 or 8000 Series device high-availability pair, most changes you make to the device
configuration also change the configuration of the whole high-availability pair.
You can view the status of the high-availability pair by hovering your pointer over the status icon in the
General section. You can also view which device or stack is the active peer and standby peer in the pair.
Procedure
Step 1
Choose Devices > Device Management.
Step 2
Next to the device high availability pair where you want to edit the configuration, click the edit icon (
In a multidomain deployment, if you are not in a leaf domain, the system prompts you to switch.
Step 3
Use the sections on the High Availability page to make changes to the high-availability pair configuration as
you would a single device configuration.
Configuring Individual Devices in a High-Availability Pair
Smart License
N/A
After you establish a 7000 or 8000 Series device high-availability pair, you can still configure some attributes
for each device within the pair. You can make changes to a paired device just as you would to a single device.
Procedure
Step 1
Choose Devices > Device Management.
Step 2
Next to the device high-availability pair where you want to edit the configuration, click the edit icon (
In a multidomain deployment, if you are not in a leaf domain, the system prompts you to switch.
Step 3
Click the Devices tab.
Step 4
From the Selected Device drop-down list, choose the device you want to modify.
Classic License
Supported Devices
Control
7000 & 8000 Series
Classic License
Supported Devices
Control
7000 & 8000 Series
Editing Device High Availability
Supported Domains
Leaf only
Supported Domains
Leaf only
7000 and 8000 Series Device High Availability
Access
Admin/Network
Admin
).
Access
Admin/Network
Admin
).
7
Advertisement
Table of Contents
