Configuring A Tcp Application For Ssl Vpn Port Forwarding - Cisco Small Business RV220W Administration Manual

Configuring Virtual Private Networks (VPNs) and Security
SSL VPN Server
STEP 1
Cisco RV220W Administration Guide
• To edit a resource, check the box and then click Edit. Then enter the
settings on the Port Forwarding Host Configuration page. See
Configuring Host Name Resolution for Port Forwarding, page
• To delete a resource, check the box and then click Delete. To select all
resources, check the box in the heading row, and then click Delete. When
the confirmation message appears, click OK to continue with the deletion,
or otherwise click Cancel.

Configuring a TCP Application for SSL VPN Port Forwarding

Use the Port Fowarding Application Configuration page to add or edit a port
forwarding application.
To open this page: From the VPN > SSL VPN Server > Port Forwarding page,
click Add or select an entry in the Configured Applications for Port Forwarding
Table and click Edit.
Click VPN > SSL VPN Server > Port Forwarding.
The following table lists some common applications and corresponding TCP port
numbers:
TCP Application
FTP Data (usually not needed)
FTP Control Protocol
SMTP (send mail)
HTTP (web)
POP3 (receive mail)
NTP (network time protocol)
Citrix
Terminal Services
VNC (virtual network computing)
Port Number
20
21
25
80
110
123
1494
3389
5900 or 5800
6
135.
134