Administering Your Cisco RV220W
Logging
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Logging
Cisco RV220W Administration Guide
Capture Packets
Use the Administration > Diagnostics > Capture Packets page to capture all
packets that pass through the specified interface. You can download the .cap file
and view it with a utility such as Wireshark.
To open this page: In the navigation tree, click Administration > Diagnostics >
Capture Packets.
The packet trace is limited to 1MB of data per capture session. When the capture
file size exceeds 1MB, it will be deleted automatically and a new capture file will be
created.
To capture packets, click Packet Trace.
In the pop-up window, select an interface and then click Start. To stop the packet
capture, click Stop.
Click Download to save a copy of the packet capture.
Capture packets for another interface, or close the pop-up window.
You can configure the Cisco RV220W to log events and send notifications when
specified events occur.
•
Logging Policies, page 176
•
Firewall Logs, page 178
•
Remote Logging Configuration, page 180
Logging Policies
You can configure multiple logging policies to collect different sets of data. You
can use these policies when viewing the logs on the View > Logs page, and when
sending files to a Syslog server (see the Administration > Logging > Remote
Logging Configuration page).
•
Managing Logging Policies, page 177
9
176