Content Filtering - Cisco Small Business RV220W Administration Manual

Firewall

Content Filtering

STEP 2
STEP 3
STEP 4
Content Filtering
STEP 1
Cisco RV220W Administration Guide
In the LAN (Local Network) Security Checks section, check or uncheck the
Enable box to enable or disable Block UDP Flood. When this option is enabled,
the router accepts no more than 25 simultaneous, active UDP connections from a
single computer on the LAN. Enabled by default.
In the ICSA Settings section, check or uncheck the Enable box to enable or
disable the following International Computer Security Association requirements:
• Block Anonymous ICMP Messages—ICSA requires the firewall to silently
block without sending an ICMP notification to the sender. Some protocols,
such as MTU Path Discovery, require ICMP notifications. Enable this setting
to operate in "stealth" mode. Enabled by default.
• Block Fragmented Packets—ICSA requires the firewall to block
fragmented packets from ANY to ANY. Enabled by default.
• Block Multicast Packets—ICSA requires the firewall to block multicast
packets. Enabled by default.
Click Save to save your settings, or click Cancel to reload the page with the
current settings.
Use the Firewall > Content Filtering page to enable and configure content filtering.
For example, you can block potentially risky web components such as ActiveX or
Java. You can prevent web access by blocking all URLs, or you can set up trusted
domains by specifying websites and identifying allowed URL keywords.
To open this page: In the navigation tree, choose Firewall > Content Filtering.
In the Content Filtering section, enter these settings:
• Content Filtering—To enable Content Filtering, check the Enable box. To
disable this feature, uncheck the box.
• Enable Check Referer: Check the box to enable checking the HTTP referer
header for allowed URLs. When enabled, this feature allows a user to access
a link on an allowed web page even if the link goes to a different domain.
4
73