Configuring The Other Side Of The Vpn Connection; What To Do Next - Cisco ASA 5550 Series Getting Started Manual

Chapter 8 Scenario: Site-to-Site VPN Configuration

Configuring the Other Side of the VPN Connection

Note

What to Do Next

78-17644-01
You have just configured the local adaptive security appliance. Now you need to
configure the adaptive security appliance at the remote site.
At the remote site, configure the second adaptive security appliance to serve as a
VPN peer. Use the procedure you used to configure the local adaptive security
appliance, starting with the
Site" section on page 8-4
Completing the Wizard" section on page
When configuring Security Appliance 2, enter the exact same values for each of
the options that you selected for Security Appliance 1. Mismatches are a common
cause of VPN configuration failures.
If you are deploying the adaptive security appliance solely in a site-to-site VPN
environment, you have completed the initial configuration. In addition, you may
want to consider performing some of the following steps:
To Do This ...
Refine configuration and configure
optional and advanced features
Learn about daily operations
Configuring the Other Side of the VPN Connection
"Configuring the Security Appliance at the Local
and finishing with the
8-11.
See ...
Cisco Security Appliance Command
Line Configuration Guide
Cisco Security Appliance Command
Reference
Cisco Security Appliance Logging
Configuration and System Log
Messages
Cisco ASA 5550 Getting Started Guide
"Viewing VPN Attributes and
8-13