Power Connector - HP Pavilion g6 Maintenance And Service Manual

8. Remove the keyboard (see
9.
Remove the top cover (see
Remove the USB board:
1. If not released already, release the ZIF connector (1) to which the USB board cable is connected,
and then disconnect the USB board cable from the system board.
2. Pry the clip (2) that secures the USB board to the base enclosure.
3. Remove the USB board and cable by lifting straight up (3).
Reverse this procedure to install the USB board.

Power connector

Description
Power connector (includes cable)
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the service door (see
74 Chapter 4 Removal and replacement procedures
Keyboard on page 52).
Top cover on page 57).
Battery on page 41).
Service door on page 42).
Spare part number
682744-001
ENWW