Ethernetaddress; Ethernetaddressgroup; Ip4Address; Ip4Group - D-Link NetDefend DFL-210 Cli Reference Manual

3.2.2. EthernetAddress

Name
Address
ActiveAddress
UserAuthGroups
NoDefinedCredentials
Comments
3.2.2. EthernetAddress
The definitions here are the same as in Section 3.2.1.3, "EthernetAddress" .

3.2.3. EthernetAddressGroup

The definitions here are the same as in Section 3.2.1.4, "EthernetAddressGroup" .

3.2.4. IP4Address

The definitions here are the same as in Section 3.2.1.5, "IP4Address" .

3.2.5. IP4Group

The definitions here are the same as in Section 3.2.1.2, "IP4Group" .

3.2.6. IP4HAAddress

The definitions here are the same as in Section 3.2.1.1, "IP4HAAddress" .
Specifies a symbolic name for the network object. (Identifier)
IP address, e.g. "172.16.50.8", "192.168.30.7,192.168.30.11",
"192.168.7.0/24" or "172.16.25.10-172.16.25.50".
The dynamically set address used by e.g. DHCP enabled Ethernet
interfaces. (Optional)
Groups and user names that belong to this object. Objects that fil-
ter on credentials can only be used as source networks and destin-
ations networks in rules. (Optional)
If this property is enabled the object requires user authentication,
but has no credentials (user names or groups) defined. This means
that the object only requires that a user is authenticated, but ig-
nores any kind of group membership. (Default: No)
Text describing the current object. (Optional)
89
Chapter 3. Configuration Reference