Iprulefolder - D-Link NetDefend DFL-210 Cli Reference Manual

3.32.2. IPRuleFolder

SLBHTTPMaxAverageLatency
SLBHTTPURLType
SLBHTTPRequestURL
SLBHTTPExpectedResponse
SLBDistribution
SLBWindowTime
RequireIGMP
MultiplexArgument
MultiplexAllToOne
RuleSet
LogEnabled
LogSeverity
Comments
3.32.2. IPRuleFolder
Description
An IP Rule Folder can be used to group IP Rules into logical groups for better overview and simpli-
fied management.
Properties
Name
Comments
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Specifies the name of the folder.
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Specifies the max average latency for the sample attempts.
(Default: 800)
Defines how the request URL should be interpreted. (Default:
FQDN)
Specifies the HTTP URL to monitor.
Expected HTTP response.
Specifies the algorithm used for the load distribution tasks.
(Default: RoundRobin)
Specifies the window time used for counting the number of
seconds back in time to summarize the number of new con-
nections for connection-rate algorithm. (Default: 10)
Multicast traffic must have been requested using IGMP be-
fore it is forwarded. (Default: Yes)
Specifies how the traffic should be forwarded and translated.
Rewrite all destination IPs to a single IP. (Default: No)
Assuming action is Goto, where to redirect rule lookup.
Enable logging. (Default: Yes)
Specifies with what severity log events will be sent to the spe-
cified log receivers. (Default: Default)
Text describing the current object. (Optional)
148
Chapter 3. Configuration Reference