Hwm; Idppipes - D-Link NetDefend DFL-210 Cli Reference Manual

2.2.29. idppipes

2.2.28. hwm

Show hardware monitor sensor status.
Description
Show hardware monitor sensor status.
Usage
hwm [-all] [-verbose]
Options
-all
-verbose
2.2.29. idppipes
Show and remove hosts that are piped by IDP.
Description
Show list of currently piped hosts.
Usage
idppipes -show [-host=<ip addr>]
Lists hosts for which new connections are piped by IDP.
idppipes -unpipe [-all] [-host=<ip addr>]
Remove piping for the specified host.
Options
-all
-host=<ip addr>
-show
-unpipe
Show ALL sensors, WARNING: use at own risk, may take long time for highspeed
ifaces to cope.
Show sensor number, type and limits.
mark all hosts.
Filter on source IP address.
Lists hosts for which new connections are piped by IDP.
Remove piping for the specified host. (Admin only)
46
Chapter 2. Command Reference