D-Link NetDefend DFL-210 Cli Reference Manual page 129

3.26.1. IDPRuleAction
Properties
Action
Signatures
BlackList
BlackListTimeToBlock
BlackListBlockOnlyService
BlackListIgnoreEstablished
PipeLimit
PipeNetwork
PipeNewConnections
PipeTimeWindow
LogEnabled
LogSeverity
Comments
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Specifies what action to take if the given signature is found.
(Default: Protect)
Specifies what signature(s) to search for in the network
traffic. (Optional)
Activate BlackList. (Default: No)
The number of seconds that the dynamic black list should re-
main. (Optional)
Only block the service that triggered the blacklisting.
(Default: No)
Do not drop existing connection. (Default: No)
Specifies the bandwidth limit in kbps for hosts triggered by
this action.
Traffic shaping will only apply to hosts that are within this
network. (Default: 0/0)
Enable piping of new connections from and to the same host.
(Default: No)
Throttling of new connections to and from the triggering host
will stop after the configured amount of time. (Default: 10)
Enable logging. (Default: Yes)
Specifies with what severity log events will be sent to the spe-
cified log receivers. (Default: Default)
Text describing the current object. (Optional)
129
Chapter 3. Configuration Reference