Ifstat; Igmp - D-Link NetDefend DFL-210 Cli Reference Manual

2.2.31. igmp

2.2.30. ifstat

Show interface statistics.
Description
Show list of attached interfaces, or in-depth information about a specific interface.
Usage
ifstat [<Interface>] [-filter=<expr>] [-pbr=<table name>]
[-num=<n>] [-restart] [-allindepth]
Options
-allindepth
-filter=<expr>
-num=<n>
-pbr=<table name>
-restart
<Interface>
2.2.31. igmp
IGMP Interfaces.
Description
Show information about the current state of the IGMP interfaces.
Send simulated messages to test configuration of the interface.
Usage
igmp
Prints the current IGMP state.
igmp -state [<Interface>]
Prints the current IGMP state. If an interface is specified, more details are provided.
igmp -query <Interface> [<MC address> [<router address>]]
Simulate an incoming IGMP query message.
Show in-depth information about all interfaces.
Filter list of interfaces.
Limit list to <n> lines. (Default: 20)
Only list members of given PBR table(s).
Stop and restart the interface. (Admin only)
Name of interface.
47
Chapter 2. Command Reference