Hwm; Temperature_Alarm (Id: 04000011); Temperature_Normal (Id: 04000012); Voltage_Alarm (Id: 04000021) - D-Link NetDefend DFL-210 Log Reference Manual

2.16. HWM

2.16. HWM
These log messages refer to the HWM (Hardware monitor events) category.

2.16.1. temperature_alarm (ID: 04000011)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.16.2. temperature_normal (ID: 04000012)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.16.3. voltage_alarm (ID: 04000021)

Default Severity
WARNING
Temperature monitor <index> (<name>) is outside the specified limit.
Current value is <current_temp> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
The unit may be overheating, this may be because the cooling is failing
or to hot enviroment.
none
Shutdown the unit and determine the problem.
1
index
name
unit
current_temp
min_limit
max_limit
WARNING
Temperature monitor <index> (<name>) is outside the specified limit.
Current value is <current_temp> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
The sensor reports that the temperature value is back in the normal
range.
None
None.
1
index
name
unit
current_temp
min_limit
max_limit
WARNING
220
Chapter 2. Log Message Reference